[C320-list] stainless steel shaft

[Russell Monaco]

I have heard from more than one that the extra torque
from the AP has bent their bronze shaft, and i
understand it is not an expensive part., I will plan
on replacing the cutlass bearing too.

--- "Richard A. Walker" <dickwalker at att.net> wrote:

> Russ I agree that the bronze will probably work. 
> You will I assume be
> replacing the prop on the hard so also take a look
> at the cutlass bearing.
> If you do not have  PSS/PYI shaft seal that also is
> a good thing to add.
> 
> Cheers,
>  
> Dick Walker
> 740 Olive Ave.
> Coronado, CA 92118-2136
> 619.435.8986
> -----Original Message-----
> From: C320-List-bounces at catalina320.com
> [mailto:C320-List-bounces at catalina320.com] On Behalf
> Of Russell Monaco
> Sent: Wednesday, November 02, 2005 4:24 PM
> To: C320-List
> Subject: [C320-list] stainless steel shaft
> 
> I have decided to go with the Autoprop and a SS
> shaft,
> but here is the next question, how do I order a SS
> shaft?   How long is it? I geuss it is 1", do I need
> anything else?
> Russ Monaco
> Commodore C320IA
> 
> 
> 	
> 		
> __________________________________ 
> Yahoo! Mail - PC Magazine Editors' Choice 2005 
> http://mail.yahoo.com
> 
> !!-  ______________________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Subscribe/Unsubscribe Here:
>
http://mail.catalina320.com/mailman/listinfo/c320-list_catalina320.com
> 
> 
> !!-  ______________________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Subscribe/Unsubscribe Here:
>
http://mail.catalina320.com/mailman/listinfo/c320-list_catalina320.com
> 



		
__________________________________ 
Start your day with Yahoo! - Make it your home page! 
http://www.yahoo.com/r/hs