[C320-list] Loose Wheel Pedestal Assembly

[John Van Vessem]

Dennis
You do not have to remove the compas.  Remove the two screws that hold the black plastic light housing, you can then lift off the aluminum cover.  With the cover removed you will have access to the 4 screws holding the guard plate.
 
john (sojourn 645)

Dennis Harris <dharris02 at vol.com> wrote:
On my boat (#694), the upper part of the Wheel Pedestal (the white 
bracket to pedestal gaurd and assembly holding shifter/trottle/compass 
has loosened allowing some play and movement when one pushes against the 
pedestal guard. I assume that this is nothing more than loose screws 
that have to be tightened, but to gain access, compass has to be 
removed. From other posts, I know to mark compass at several spots 
against mating parts so that I can regain alignment. I believe that 
access to compass is through the two screws at top of black plastic top 
on compass, and after removing these, access to the compass hold down 
screws is gained. Has anyone had a similar problem?.....if so are there 
any helpful hints on fixing the problem. Can the pedistal mount 
screws/bolts be tightened without removing the compass? Thanks for any 
assistance.

Dennis Harris C320 #694


!!- ______________________________________________
!!- C320-List at catalina320.com mailing list
!!- Subscribe/Unsubscribe Here: http://mail.catalina320.com/mailman/listinfo/c320-list_catalina320.com