[C320-list] Installed new Garhauer Dinghy Davits

[Richard A. Walker]

Mine is about 130 lbs.  Including a 9' dink, fuel and a 2cy 4hp engine.  I
elected to get the 1" ss pipe model that is rated for 300 lbs.

Cheers,
 
Dick Walker
C-320 (687) WindWalker II
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986


-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Robert Seastream
Sent: Tuesday, August 01, 2006 2:06 PM
To: catalina at thehares.com; C320-List
Subject: Re: [C320-list] Installed new Garhauer Dinghy Davits

What's the size and weight of the dinghy and motor you carry?

Bob Seastream
Intuition, hull #906

On Aug 1, 2006, at 3:59 PM, Jeffrey Hare wrote:

> Hello,
>
>
>
>     Prior to our cruise around Casco Bay, Maine I ordered and 
> installed the
> new Garhauer Dinghy Davits.
>
>
>
> I purchased the DD6-1-1/4 model for $800        vs.   ~$1300 for the
> comparable Ocean Marine HSD 40.
>
>
>
> With some advice and encouragement from Dick Walker, I installed them 
> myself
> in about 2 hours with my daughter Amanda occasionally holding a wrench 
> for
> me.
>
>
>
>
>
> My assessement:
>
> ===============
>
> They are Fantastic, STRONG and beautifully finished.
>
>
>
> Everything I needed was supplied except some 4200 for bedding.
>
>
>
> For tools, I only needed a marker, a 1/4"  drill bit and two wrenches 
> and a
> couple allen wrenches.
>
>
>
> They were so easy to install I kept thinking there must be more to it.
>
>
>
> They carry the dinghy lower than the Ocean Marine version, but there's 
> still
> no chance of the dinghy hitting water even if you put the rail in the 
> water.
>
>
>
> I ordered a 6' crossbar instead of the stock 5' one.  I ended up 
> trimming
> off ~4" with a large pipe cutter.   Newer Hulls with the modern aft 
> sloping
> stern rail seats should get the 6' crossbar.
>
>
>
> Having seen and used both the Ocean Marine and now, the Garhauer Marine
> davits,  there's no question the Garhauer 1- 1/4" version is a much 
> better
> value.
>
>
>
> Comes with 6:1 blocks with Cam cleat and regular cleats for tying off 
> the
> line.
>
>
>
>
>
> I'll be posting additional pictures from my installation along with a 
> few
> more of Dick Walker's davit installation some time soon (he got the 
> DD6-1"
> version, whereas I got the slightly heavier version with 1-1/4" tubes)
>
>
>
>
>
> -Jeff Hare
>
>
>
>
>
>
>
>
>
>
>
>
>