[C320-list] BOMAR hatches
Dave Anderer
danderer at udel.edu
Thu Jul 6 15:29:41 PDT 2006
Try just backing the screws (on the latches that bind) out a turn or
so. That made them loose enough to work smoothly for me.
Quentin Murphy wrote:
> Can anyone address why the screens that come with the hatches (mid cabin and
> aft cabin) are a PITA to install? These are aluminium framed screens with
> rounded corners that fit into a recess in the hatch. Then you just close
> off eight white plastic levers that hold the screen assembly in place. If
> only it was that simple. Anyway, it's not just a problem on our boat. I've
> experienced the same problem on a friend's C-420. You're lucky if you can
> turn two or three of the "latches" into the recess in the aluminium. I was
> thinking of using a Dremal or similar small tool to grind away some
> aluminium at these eight points on the frame. What have others done with
> this problem as I've never been able to install these screens without great
> difficulty, if at all? So after spending ten minutes, or so, trying to get
> a screen in place, then you have to undo the whole thing if you want to
> close the hatch if it starts raining (or run onto the deck and close it from
> the outside). If bug season wasn't on the way, I would put them in a garage
> for storage. Those cloth screens with weights don't work well in my
> opinion, so I want to get the Catalina supplied screens to work as intended.
>
> Quentin Murphy
> Celtic Knot #667
>
More information about the C320-list
mailing list