[C320-list] AFI cockpit table
crashley at gte.net
crashley at gte.net
Tue Jun 20 22:24:54 PDT 2006
Touche.
CRA
----- Original Message -----
From: "Jeffrey Hare" <catalina at thehares.com>
To: "'C320-List'" <C320-List at catalina320.com>
Sent: Tuesday, June 20, 2006 7:50 AM
Subject: Re: [C320-list] AFI cockpit table
> LOL! Yea, I swore I'd never own a boat with TUT (teak up top) too, but
> since the CP Table is covered by the binacle cover whenever I'm not
> sailing,
> it keeps its nice teak-look with just an oiling every year or two.
> Probably
> less work than it takes to keep white starboard actually white.
>
> -JeffH
>
>
> -----Original Message-----
> From: crashley at gte.net [mailto:crashley at gte.net]
> Sent: Tuesday, June 20, 2006 10:20 AM
> To: C320-List
> Subject: Re: [C320-list] AFI cockpit table
>
> I got the smaller poly version as I believe in the TMT issue (too much
> teak). It was about $220.
>
> CRA
> Rosebud #882
>
>
> ----- Original Message -----
> From: "Jeffrey Hare" <catalina at thehares.com>
> To: "'C320-List'" <C320-List at catalina320.com>
> Sent: Tuesday, June 20, 2006 4:51 AM
> Subject: Re: [C320-list] AFI cockpit table
>
>
>>
>> The Edson table is really a great table. Nice Teak, SS support hardware,
>> no
>> leg, no custom work needed. But since you only buy these things once, it
>> shouldn't be too much of an issue.
>>
>> It's also a 200-300 hundred dollars more. I think I was quoted nearly
>> $600
>> for a similar setup. I paid somewhere in the $300 range for the AFI
>> using
>> the Boat/US 20% off coupon. If you're flush, go with the Edson table. I
>> would have made the support out of SS but I'm not set up to do metal work
>> yet. :(
>>
>> -JeffH
>>
>> -----Original Message-----
>> From: crashley at gte.net [mailto:crashley at gte.net]
>> Sent: Tuesday, June 20, 2006 1:42 AM
>> To: C320-List
>> Subject: Re: [C320-list] AFI cockpit table
>>
>> Okay, I'll probably piss off a bunch of people, but why didn't you buy an
>> Edson cockpit table. I don't think it even has a "leg".
>>
>> CRA
>> Rosebud #882
>>
>>
>> ----- Original Message -----
>> From: "Chris Burti" <cburti at yahoo.com>
>> To: "C320-List" <C320-List at catalina320.com>
>> Sent: Monday, June 19, 2006 8:02 AM
>> Subject: [C320-list] AFI cockpit table
>>
>>
>>>I just purchased the AFI cockpit table.
>>>
>>> Of course, I have run into the same problem with the
>>> leg previously discussed on the list. I have two
>>> questions.
>>>
>>> I've looked at Jeff's excellent and elegant solution
>>> on the website, but am left wondering if anyone else
>>> has come up with an even simpler solution.
>>>
>>> Does anyone else think that it is incredibly stupid to
>>> design a table that will not work on the most popular
>>> pedestal and guard on the market. (My son, a diehard
>>> Tarheel, suggested that it might be the work product
>>> of an NCSU Engineering alumnus.)
>>>
>>> Chris Burti
>>> "Commitment"
>>> Catalina 320, #867,
>>> Farmville, NC
>>>
>>> __________________________________________________
>>> Do You Yahoo!?
>>> Tired of spam? Yahoo! Mail has the best spam protection around
>>> http://mail.yahoo.com
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
More information about the C320-list
mailing list