[C320-list] folding props again

[niedobre at aol.com]

It was AB Marine not Maxprop.  I dealt with Geoff Prior also and he was 
very helpful.  I ended up buying an autoprop

-----Original Message-----
From: niedobre at aol.com
To: C320-List at catalina320.com
Sent: Thu, 30 Mar 2006 15:58:22 -0500
Subject: Re: [C320-list] folding props again

   Maxprop also handles Gori.  Go to maxprop website there is a way to
request information for you vessel

-----Original Message-----
From: Scott Thompson <sthompson at toad.net>
To: C320-List <C320-List at catalina320.com>
Sent: Thu, 30 Mar 2006 11:49:36 -0500
Subject: [C320-list] folding props again

    Sorry to beat a dead horse, but I can't seem to find the answers in
the
older threads on this.  Surprise is 1999 wing keel model, hull 653.
She
has the Yanmar 3GM30F, continuous HP rating 24.1HP at 3400 RPM.  Her
gearbox has 2.21:1 reduction in forward gear.

For cost reasons and to get minimal drag I'm only looking at the Gori
and Martec 2 blade folders.  What pitch and diameter of these props
would be recommended for my boat?  Am I correct that the shaft is 1
inch, standard US taper?

Who has the best deals on these props?  Any reason to prefer Gori to
Martec or vice versa?  I've read good things about both.


!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join



!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join