[C320-list] Lack of Section with Head Pump

[Irv Grunes]

And I think I read someplace to use petroleum jelly to lubricate the plunger
in the pump.
Irv Grunes Isle of Wight #851

-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com]On Behalf Of
alahlm at comcast.net
Sent: Thursday, May 04, 2006 7:58 AM
To: C320-List
Subject: Re: [C320-list] Lack of Section with Head Pump


Annie
 The o-ring on the plunger may have slipped off or be broken you can a
standard o-ring at any hardware store   to remove the plunger there are four
screws that hold the assembly in place
 Al Ahlman
    #476

-------------- Original message --------------
From: "Annie Bennett" <annie at sydneyprivatesailing.com.au>

> Usually the problem with the head seems to be it becoming too stiff to
pump.
> My toilet (only one year old as I replaced it with a new Jabsco last year)
> has recently started to not be stiff enough. Sometimes it works fine - but
> seems to slip slightly. At other times if you pump the handle briskly up
> and down you suddenly get suction but at other times you pump the handle
up
> and down, fast or slow, but with no suction - and no water flow. Any
ideas?
> I'm getting worried how I'm going to clean out the contents of the bowl if
> it won't pump.
>
> Annie Bennett #812
>
>
>
>
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join