[C320-list] upwind mainsail trim

[crashley at gte.net]

What point of sail were you on?

CRA

----- Original Message ----- 
From: "Adam Weiner" <esquirecatering at rcn.com>
To: "'C320-List'" <C320-List at catalina320.com>
Sent: Wednesday, May 17, 2006 8:23 PM
Subject: Re: [C320-list] upwind mainsail trim


> If you want to sail with good efficiency you have to use the traveler.
> Last week in 25 nm we probably adjusted it eight or nine times.
> 
> Adam
> 
> -----Original Message-----
> From: C320-List-bounces at catalina320.com
> [mailto:C320-List-bounces at catalina320.com] On Behalf Of crashley at gte.net
> Sent: Tuesday, May 16, 2006 9:50 PM
> To: joe at dolphinmortgage.com; C320-List
> Subject: Re: [C320-list] upwind mainsail trim
> 
> 
> My thought is that unless you really need to go in a certain direction 
> (i.e., very close to the wind), you will never have to use the traveler
> at 
> any setting but centered. Am I right or is there some other compelling 
> reason to use it? Maybe I'm just lazy, and don't race.
> 
> CRA
> Rosebud #882
> 
> 
> ----- Original Message ----- 
> From: "Joe Barrett" <joe at dolphinmortgage.com>
> To: "'C320-List'" <C320-List at catalina320.com>
> Sent: Tuesday, May 16, 2006 1:19 PM
> Subject: Re: [C320-list] upwind mainsail trim
> 
> 
>> Hi Mike, assuming the mainsheet was already trimmed in hard from the 
>> previous tack the traveler we would leave the traveler slightly down 
>> from centerline as the Jib Trimmer brings in the big 155 Genoa. As the
> 
>> Genoa comes in we would then head up until in a closehauled position. 
>> At that time the boom would be just slightly off the centerline of the
> 
>> boat. Seems to work OK,
>> Joe Barrett
>>
>> -----Original Message-----
>> From: C320-List-bounces at catalina320.com 
>> [mailto:C320-List-bounces at catalina320.com] On Behalf Of Lachance, 
>> Michael B (ISD, IT)
>> Sent: Tuesday, May 16, 2006 3:32 PM
>> To: C320-List
>> Subject: Re: [C320-list] upwind mainsail trim
>>
>> Question for you racers out there... Going upwind, how close to the 
>> centerline do you place the boom before starting to work on the other 
>> mainsail controls for optimum speed and pointing? Do you initially 
>> position the boom right on or just off the centerline or considerably 
>> eased from that position? Mike
>>
>>
>> **********************************************************************
>> ***
>> This communication, including attachments, is
>> for the exclusive use of addressee and may contain proprietary,
>> confidential and/or privileged information.  If you are not the
> intended
>> recipient, any use, copying, disclosure, dissemination or distribution
> is
>> strictly prohibited.  If you are not the intended recipient, please
> notify
>> the sender immediately by return e-mail, delete this communication and
>> destroy all copies.
>>
> ************************************************************************
> *
>>
>>
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>> 
> 
> 
> 
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
> 
> 
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
>