[C320-list] upwind mainsail trim

[Adam Weiner]

Gee, I thought I was the only one who seemed to always be going upwind.
I sail for four hours up wind, due a 180 turn back to the marina and
sail for four hours straight upwind.  Never understood it.

Adam

-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com] On Behalf Of T. Scott
Thompson
Sent: Thursday, May 18, 2006 7:58 PM
To: C320-List
Subject: Re: [C320-list] upwind mainsail trim


More often than not where I want to go is straight up wind, so getting 
that traveller set properly for optimum pointing is important.  Now if I

could only get my wife to see it that way.


crashley at gte.net wrote:
> My thought is that unless you really need to go in a certain direction
> (i.e., very close to the wind), you will never have to use the
traveler at 
> any setting but centered. Am I right or is there some other compelling

> reason to use it? Maybe I'm just lazy, and don't race.
>
> CRA
> Rosebud #882
>
>
> ----- Original Message -----
> From: "Joe Barrett" <joe at dolphinmortgage.com>
> To: "'C320-List'" <C320-List at catalina320.com>
> Sent: Tuesday, May 16, 2006 1:19 PM
> Subject: Re: [C320-list] upwind mainsail trim
>
>
>   
>> Hi Mike, assuming the mainsheet was already trimmed in hard from the 
>> previous tack the traveler we would leave the traveler slightly down 
>> from centerline as the Jib Trimmer brings in the big 155 Genoa. As 
>> the Genoa comes in we would then head up until in a closehauled 
>> position. At that time the boom would be just slightly off the 
>> centerline of the boat. Seems to work OK,
>> Joe Barrett
>>
>> -----Original Message-----
>> From: C320-List-bounces at catalina320.com 
>> [mailto:C320-List-bounces at catalina320.com] On Behalf Of Lachance, 
>> Michael B (ISD, IT)
>> Sent: Tuesday, May 16, 2006 3:32 PM
>> To: C320-List
>> Subject: Re: [C320-list] upwind mainsail trim
>>
>> Question for you racers out there... Going upwind, how close to the 
>> centerline do you place the boom before starting to work on the other

>> mainsail controls for optimum speed and pointing? Do you initially 
>> position the boom right on or just off the centerline or considerably

>> eased from that position? Mike
>>
>>
>> *********************************************************************
>> ****
>> This communication, including attachments, is
>> for the exclusive use of addressee and may contain proprietary,
>> confidential and/or privileged information.  If you are not the
intended
>> recipient, any use, copying, disclosure, dissemination or
distribution is
>> strictly prohibited.  If you are not the intended recipient, please
notify
>> the sender immediately by return e-mail, delete this communication
and
>> destroy all copies.
>>
************************************************************************
*
>>
>>
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>> !!- _______________________________________
>> !!- C320-List at catalina320.com mailing list
>> !!- Archives Here: http://www.catalina320.com/list/archives
>> !!- Change Subscription Here: http://www.catalina320.com/list/change
>> !!- Subscribe Here: http://www.catalina320.com/list/join
>>
>>     
>
>
>
> !!- _______________________________________
> !!- C320-List at catalina320.com mailing list
> !!- Archives Here: http://www.catalina320.com/list/archives
> !!- Change Subscription Here: http://www.catalina320.com/list/change
> !!- Subscribe Here: http://www.catalina320.com/list/join
>   


!!- _______________________________________
!!- C320-List at catalina320.com mailing list
!!- Archives Here: http://www.catalina320.com/list/archives
!!- Change Subscription Here: http://www.catalina320.com/list/change
!!- Subscribe Here: http://www.catalina320.com/list/join