[C320-list] Dingy Davits

[Richard A. Walker]

Thanks Pat.  A close up of the attachment points would be great when you get
an opportunity.

What is you hull #?

Cheers,
 
Dick Walker
C-320 (687) WindWalker II
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986

-----Original Message-----
From: C320-List-bounces at catalina320.com
[mailto:C320-List-bounces at catalina320.com] On Behalf Of Pat Tyler
Sent: Sunday, May 28, 2006 10:11 AM
To: C320-List
Subject: Re: [C320-list] Dingy Davits

Dick,
I installed Ocean Marine davits on mine and have a 10'6" dingy with a 5HP
weighing about 160 lbs total.  I have a 6 to 1 block on the stern and a 4 to
1 on the bow.  It works very well and easy to install.  Took me about 8
hours on mine then I installed one on a friends and it only took about 4
hours the second time.  It's very strong and I installed the two rail to
swim platform stainless rods for extra support since all my sailing is off
shore.  I had the dingy and motor on in a 40 knot storm with no problems.
If you want some pic let me know and I'll go down to the boat and take a
few.
Pat

----- Original Message ----- 
From: "Richard A. Walker" <dickwalker at att.net>
To: "'C320-List'" <C320-List at catalina320.com>
Sent: 05/28/2006 12:20 PM
Subject: [C320-list] Dingy Davits


> I am considering installing Davits on WindWalker so I am asking for some
> information.  I have a 8'9"" dingy with a 4 HP e Cycle outboard.  I think
> the entire dingy with the motor weighs about  110-120 lbs.
>
> 1. Has anyone installed the Garhauer davits?  They list for $600 and
> seem to be a real bargain.
> 2. How far apart is the cross brace?
> 3. Can you email me an image.  I am interested ion exactly where they
> are attached.
> 4. How have other brands worked?
>
> Thanks
>
> Dick Walker
> C-320 (687) WindWalker II
> 740 Olive Ave.
> Coronado, CA 92118-2136
> 619.435.8986