[C320-list] Bilge pump problem
Michael
slopesandshores at yahoo.com
Fri Oct 20 08:54:32 PDT 2006
----- Original Message ----
From: Marty Mattler <mmattler at optonline.net>
To: C320-List <c320-list at catalina320.com>
Sent: Friday, October 20, 2006 11:18:58 AM
Subject: [C320-list] Bilge pump problem
My bilge pump will not pump water out of the bilge if the pump out take hose has water in it. I discovered this after empting the water heater into a dry bilge. After removing water from the out take hose the bilge pump worked but the same issue happened after I retested the pump. For those of you that have replaced your bilge pump and have the deeper bilge model (I have #754, 2000 model), did you use a similar Jabsco replacement pump or change to a submersible model?
Marty Mattler
Sailscall #754
Marty,
I am having the same problem( I have #740). If you find the fix let me know. I have tinkered, blown out the lines, dove on the bottom to clean the thru hull, etc.
Michael Mitch
Kent Island
More information about the C320-list
mailing list