[C320-list] Blocks on mast collar

[Denny Browne]

When you order these, be sure to tell them if you need the studs as well. I
forgot to do this and they sent me blocks without studs a couple of years
ago.

Denny Browne
A Cappella #935
Redondo Beach

-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of Jeffrey Hare
Sent: Sunday, September 17, 2006 6:15 PM
To: 'C320-List'
Subject: Re: [C320-list] Blocks on mast collar

Hi,

The blocks at the base of the mast are made by Garhauer Marine.  They're not
listed in the catalog, but call them and ask for the mast step turning
blocks for a C320. Remind them that they're the ones with the stud and the
nut that slides into the mast step.

Most likely yours are corroded, since the mast step is aluminum, and the
stud is SS.  Find a penatrating oil or corrosion cutting penetrating oil and
spray them.  If they aren't lead fair then they'll bend the block and/or the
mounting stud.

They should be able to turn freely to be positioned for a fair lead. It
isn't necessary to turn them until they're tight, just until they're
threaded into the nut sufficiently which is in all the way, then back off a
half turn or so.

I just made a quick drawing of how these studs attach.  You should be able
to remove the block itself, and then with some work, free the stud.

http://www.catalina320.com/gallery/MastStep  Click on the drawing to see a
larger version.  Ok, so I'm not an artist.

You can order more blocks or mast studs from Garhauer Marine.  They're quite
inexpensive and guaranteed 10 years.  

-JeffH

PS: Just another example of not using TefGel or Lanocote on the studs from
time to time.

-----Original Message-----
From: Morey Waltuck [mailto:mwaltuck at comcast.net] 
Sent: Sunday, September 17, 2006 8:33 PM
To: C320-List at catalina320.com
Subject: [C320-list] Blocks on mast collar

This is my first year owning C320 #352.  My question is, are the Schaefer
blocks on the mast collar supposed to rotate horizontally.  Ours seems to be
fixed and two of them are not aligned exactly to where the lines are going.
If they are supposed to rotate, what is the best way to free them up?  If
not, how do I reset them?

Morey Waltuck
Getaway #352
Quincy MA