[C320-list] Cutlass bearing diameter?? Shaft Length??

[Bruce Heyman]

Mike,
Which one did you go with?  The G4-MR11-15W-D for $28.99 or the
G4-MR11-16W-C-CS for $23.97?   Did you find a vender that would sell them
for less?
Thanks,
Bruce
Somerset 671 SoCal

-----Original Message-----
From: c320-list-bounces at catalina320.com
[mailto:c320-list-bounces at catalina320.com] On Behalf Of
frpoint at earthlink.net
Sent: Friday, April 06, 2007 8:36 AM
To: catalina at thehares.com; C320-List
Subject: Re: [C320-list] Cutlass bearing diameter?? Shaft Length??

Jeff, I replaced my prop shaft last year. I don't remember the outside dia 
of the cultess bearing but the prop shaft is 55.250 long 1 inch dia.. I 
installed a Gori 3 bladed prop and had to trim about .187 from the threaded 
end of the shaft so the prop would engage the taper properly (I would not 
have noticed this if I tried fitting the prop underwater). On another boat 
related subject. I would like to report that I tried the Dr. Led mr11 led 
light and I can say I will be replacing all of our interior lights with 
them. Brightness and color are very close to the halogen bulbs currently 
used.

Cheers,
Mike
C320 #769
SF



----- Original Message ----- 
From: "Jeffrey Hare" <Catalina at thehares.com>
To: "'C320-List'" <c320-list at catalina320.com>
Sent: Friday, April 06, 2007 7:37 AM
Subject: [C320-list] Cutlass bearing diameter?? Shaft Length??


> Hi All,
>
>  I've got two questions for anyone with a boat in the 400-900 range who 
> has
> replaced their cutlass bearing and/or prop shaft.
>
> Can anyone confirm the outside diameter of the cutlass bearing?
>
> Can anyone confirm the prop shaft length *you* used when replacing your 
> prop
> shaft?
>
> We measured the prop shaft as best we could with it still in the boat.
>
> ROD BOER:
> You replaced your shaft and cutlass a while back.
> Can you check what length the machine shop cut yours to?
>
> Thanks, I'm ready to send my orders in, and am looking for a sanity check
> from people.
>
> -Jeff
>
>
> PS: I all the boats may be different, etc, but I'm just looking for data 
> to
> do a sanity check prior to ordering.
>
>