[C320-list] exhaust mixing elbows

[Chris Holt]

I have the same problem with the leaking.
I replace the exhaust hose last year thinking it was the problem but it 
still leaks.
What is special about the hose clamps you are referring to?

Thanks,

Chris

----- Original Message -----
From: <jonvez at comcast.net>
To: "C320-List" <c320-list at catalina320.com>
Sent: Monday, April 16, 2007 8:31 AM
Subject: Re: [C320-list] exhaust mixing elbows

> Dave,
>
> This is the exact setup I have. I notice you also have some leaking from 
> the hose/elbow connection on your transmission housing. I bought some hose 
> clamps that are designed for exhaust hose which eliminated that problem. 
> Unfortunately it still does a number on the edge of the hose. What is your 
> Hull #?. I have #582/99....
>
> Regards,
>
> Jon
>
> -------------- Original message -------------- 
> From: Dave Anderer <danderer at udel.edu>
>
>> No very good pictures. Here are a couple - the piece is wrapped in
>> the silver insulation.
>>
>> http://udel.edu/~danderer/elbow1.jpg
>> http://udel.edu/~danderer/elbow2.jpg
>>
>>
>> On Apr 15, 2007, at 1:38 PM, Bruce Heyman wrote:
>>
>> > Dave,
>> > Do you have any pictures by chance? Also is the custom part
>> > attached at all
>> > three points with hoses?
>> > Thanks,
>> > Bruce
>> > Somerset #671 SoCal
>>
>>
>