[C320-list] Perkins raw water pump

[Darrell]

yes
----- Original Message ----- 
From: "Arthur Gates" <argates2nd at earthlink.net>
To: "Darrell <dgray at n-sea.org>, C320-List" <c320-list at catalina320.com>
Sent: Monday, February 26, 2007 6:52 AM
Subject: Re: [C320-list] Perkins raw water pump


> Darrell,
> Are you referring to the shaft on which the impeller rides?
> Rollie  #182
>
>
>> [Original Message]
>> From: Darrell <dgray at n-sea.org>
>> To: C320-List <c320-list at catalina320.com>
>> Date: 2/26/07 9:24:30 AM
>> Subject: Re: [C320-list] Perkins raw water pump
>>
>> Yesterday, I noticed that I have water dripping from my raw waterpump on
> my
>> perkins M30. The water is actually comming from the holes in the pump
>> housing where the shaft is exposed. I assume there must be some kind of
> seal
>> around the shaft. Has any one else encountered this and replaced the 
>> seal?
>>
>> Darrell #88
>> ----- Original Message ----- 
>> From: "Martin Raphael" <mraphael at zhonka.net>
>> To: "C320-List" <c320-list at catalina320.com>
>> Sent: Friday, February 23, 2007 4:39 PM
>> Subject: [C320-list] Impeller cover damage
>>
>>
>> > As I was getting my engined warmed up this weekend I noticed water on
> the
>> > sole and realized that the cover over the impeller was missing a screw
> and
>> > thus salt water was leaking from behind the cover -- I then found that
> 2
>> > more screws had corroded and the heads broke off as I was adjusting
> them.
>> > I am looking for advice on how to remove the broken screws from the
>> > housing --  will I need to drill them out and retap for larger screws?
> My
>> > engine is a 1994 Perkins M30.  Thanks for any advice you can offer.
>> > Martin Raphael
>> > Rhapsody #108
>> >
>> >
>>
>
>
>