[C320-list] More on Frig

[wes.giles at averydennison.com]

Some of us replaced the wire shelves with plastic tubs that fits along the 
ridges on either side. It allowed us to slide the tubs back and forth to 
access the lowest part of the fridge, and allowed more volume than the 
shelve did. We drilled holes in the tubs to for ventilation. Works great.

Wes



"Robert E. Sloat" <resloat at comcast.net> 
Sent by: c320-list-bounces at catalina320.com
06/01/2007 03:08 PM
Please respond to
C320-List <c320-list at catalina320.com>


To
"C320-List" <c320-list at catalina320.com>
cc

Subject
Re: [C320-list] More on Frig






John-Great and brilliant and so obvious in hindsight.  I have a little 
play 
in the ends of the shelves on Hull 894 and will stop by the hardware store 

after getting the rod diameters and needed length.  Thanks.

Now, how do I get hull speed beating in 4 knots true!

Bob Sloat
Savannah 894
----- Original Message ----- 
From: <jonvez at comcast.net>
To: "C320-List" <c320-list at catalina320.com>
Sent: Friday, June 01, 2007 9:37 AM
Subject: Re: [C320-list] More on Frig


> Herb,
>
> Brilliant--no, but I too was so frustrated that I did come up with a 
> solution that has worked great for me.
>
> I took a measurement of the diameter of the ends of the tongs of the 
> shelves with the plastic protective caps removed (the part that holds 
the 
> shelves up on the fridge ledge). I went to Home Depot and found some 
very 
> rigid plastic tubing that snugly fit around the shelve ends. I cut a 
piece 
> of tube and pushed them over the ends effectively lenghening the 
> shelves.Works great and there is no loss of support because the gap you 
> are covering is so small and the tubing goes on the shelve end with a 
good 
> amount of overlap. This is a very easy and quick fix. If my explanation 
is 
> confusing, let me know and I will try and clarify or take pics and post 
> them this weekend....
>
> Regards,
>
> Jon Vez
>
> -------------- Original message -------------- 
> From: hcreech at comcast.net
>
>> I really don't like the way the shelves fit in the frig, if you place 
too 
>> much
>> weight in them they are always falling. So far I have wire tied the top 

>> two
>> shelves together and added plastic extenders to the posts but they 
still 
>> fall.
>> Someone on this list must have some brilliant solution. I'll just sit 
>> back and
>> wait for it to appear.
>>
>> Sincerely,
>> Herb Creech
>> Cloud Chaser #606
>> 





- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.