[C320-list] Vibration Noise and Dealer

[brucestanley]

Thanks Bob
I will look at the Stern Gland ... but think it is something like Alignment.
BruceS
C320 #1084

----- Original Message ----- 
From: "R Airis" <rairis at comcast.net>
Subject: Re: [C320-list] Vibration Noise and Dealer


> Check your dripless shaft seal if you have one. Mine got a bit of gunk on
> the face of the carbon or steel where it rotates. It then rattles against 
> the shaft. Use 600 grit wet sandpaper folded so it will do both faces @ 
> the same time to clean up the faces. Some watter will come in, it`s like 
> checking your knot speed wheel. I do it every spring. I think that cure is 
> in the shaft seal booklet.
>
> Bob
> Hale kai 2.......#266