[C320-list] Vibration Noise and Dealer

[brucestanley]

Thanks Lew
I did check the Zinc, 3 weeks ago when it was being Antifouled.
BruceS
C320 #1084

----- Original Message ----- 
From: <sailorlew at aol.com>
To: <c320-list at catalina320.com>
Sent: Thursday, March 15, 2007 12:59 PM
Subject: Re: [C320-list] Vibration Noise and Dealer


> Possibly a loose zinc?
> Lew
>
> -----Original Message-----
> From: rairis at comcast.net
> To: c320-list at catalina320.com
> Sent: Wed, 14 Mar 2007 7:14 PM
> Subject: Re: [C320-list] Vibration Noise and Dealer
>
>
> Check your dripless shaft seal if you have one. Mine got a bit of gunk on
> the face of the carbon or steel where it rotates. It then rattles against 
> the shaft. Use 600 grit wet sandpaper folded so it will do both faces @ 
> the same time to clean up the faces. Some watter will come in, it`s like 
> checking your knot speed wheel. I do it every spring. I think that cure is 
> in the shaft seal booklet.
>
> Bob
> Hale kai 2.......#266
> ________________________________________________________________________
> AOL now offers free email to everyone.  Find out more about what's free 
> from AOL at AOL.com.