[C320-list] (no subject)
Bruce Stumpp
bstumpp at comcast.net
Sun Feb 10 12:33:08 PST 2008
Bruce,
I'm not familiar with the term "grub" screw but a couple of times the bolt
holding the top of the boom vang fell out. The problem was a non-locking
nut had been used and the bolt was a little short. I purchased a longer
bolt and a locking nut - problem resolved.
Bruce Stumpp
#647, Adventure
Frog Mortar Creek, MD
Message: 9
Date: Sun, 10 Feb 2008 17:50:33 +1100
From: "Bruce Stanley" <brucestanley36 at gmail.com>
Subject: [C320-list] grub screw on the Deck
To: C320-List <c320-list at catalina320.org>
Message-ID:
<9d5459ff0802092250ha2d5717kc705f5a3782cb0ec at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
oops!
I found a tiny (1/4") stainless steel Grub Screw at the base of the mast,
today. We had just finished a 12 to 20+ knot sail.
Any ideas as to where it may have come from .... Spreaders?
We have a Charleston In-Mast rig.
Thanks in anticipation.
Bruce Stanley C320 #1084
Sy
More information about the C320-list
mailing list