[C320-list] MK II Knocking

[Larry Frank]

Do you mean the shaft log is 18" long?  The shaft is more like 5 feet.

Sorry to hear about the window, but it's a boat and it will dry out.  I
always worry that I am going to leave those ports open.  Of course for me it
will happen when I am hosing out the cockpit.........

Larry
WindSwept 320 #246

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Barb & Bob
Uhlman
Sent: Thursday, July 10, 2008 8:32 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] MK II Knocking

John,

Our dealer was in touch with Gerry D. and the dealer told me that the shaft
is about 18 inches long and 1" in diameter.  The shaft tunnel is 1 1/4"  so
that gives you about 1/8" clearance all the way around.  Our dealer's
engineer (Larry) re-aligned the engine and it's working fine at the 18-2200
rmp level now.  Hope yours goes well too.  

Unfortunately, he left the aft cabin portlight above the hanging locker open
and the area had 3" of rain the following night.  I found 2" of standing
water on the aft cable sole and water in the bottom of the cedar locker and
the bench locker.  The bench cushion was full of water as well.  We brought
that home and are trying to dry it out.  The cushion cover is stapled on,
not zippered.  We are not sure if the "leatherette" is breathable and what
kind of foam was used in the cushion.

Always something....

We still love the boat - the way it sails!!

Barb & Bob Uhlman
Whisper, #1158
Carlyle Lake, IL

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of John Frost
Sent: Thursday, July 10, 2008 6:33 PM
To: C320-List at Catalina320.com
Subject: [C320-list] MK II Knocking

I am one of the MKII owners who thought I had avoided the knocking problem.
Unfortunately, last weekend when I let the engine run at speeds I had
avoided where I do have a shaft vibration, I found that I also had the
knock. I am hoping that when I get around to aligning the engine the knock
goes away.

John Frost
2007 C320 MKII, Hull # 1118
Lake Guntesville, AL

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
sailorlew at aol.com
Sent: Thursday, July 10, 2008 5:29 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Garmin 230 Chartplotter

What has happened with the knocking that you were experiencing when under
way?
Lew


-----Original Message-----
From: Barb & Bob Uhlman <uhlman at sbcglobal.net>
To: C320-List at Catalina320.com
Sent: Thu, 10 Jul 2008 7:54 am
Subject: Re: [C320-list] Garmin 230 Chartplotter



Our new 320 (#1158) came with a binder of literature from Ocean Marine.  It
included the elec. toys.  BTW, we love the boat.  It sails beautifully.

Barb Uhlman
Whisper, #1158

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
Orlando.Duran at AveryDennison.com
Sent: Wednesday, July 09, 2008 5:48 PM
To: C320-List
Subject: Re: [C320-list] Garmin 230 Chartplotter

They are the folks that install the pods for Catalina and they also provide
the Raymarine eqpt to Catalina on a 'exclusive' contract...

Again, not sure if this is Catalina-wide or if it's a given size and up...


----------------------------------
Regards,
OD

Sent from my BlackBerry Wireless Handheld


----- Original Message -----
From: "Chris Burti" [clburti at gmail.com]
Sent: 07/09/2008 01:50 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Garmin 230 Chartplotter

Orlando,
Who is Ocean Marine?

On Wed, Jul 9, 2008 at 3:23 PM, <Orlando.Duran at averydennison.com> wrote:

> They do install as an OEM agreement with Ocean Marine although not sure if
> there's a model cutoff...ie 34' and up...their standard is:
>
> ST 60 instruments
> C80 Chartplotter
> Small raydome for the radar--16nm  (forgot the model number)
>
>
> ----------------------------------
> Regards,
> OD
>
> Sent from my BlackBerry Wireless Handheld
>
>
> ----- Original Message -----
> From: "Chris Burti" [clburti at gmail.com]
> Sent: 07/09/2008 11:58 AM
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Garmin 230 Chartplotter
>
> Irv,
> My understanding is that Catalina does not install any instruments as OEM.
> I
> think they cut deals with the suppliers that the Catalina dealers can take
> advantage of so that there are a lot of Catalinas with the same or similar
> equipment packages.
>
> On Wed, Jul 9, 2008 at 1:40 PM, Irving Grunes <igrunes at gmail.com> wrote:
>
> > Guys,
> > Our 2001 #851 Garmin GPS230 chartplotter is trying to die.
> >
> > 1. What is the chartplotter that Catalina is now supplying with their
> > current production?
> >
> > 2. With what manufacturer and model number have other C320  owners used
> to
> > replace their old chartplotters?
> >
> > 3. Did the replacement have the same multi-pin power and seatalk
> connector
> > that Garmin used with the GPSMAP 230 with no changes?
> >
> > 4. Did the replacement fit in the same navpod as the 230 chartplotter
> even
> > though the cutout may have to change?
> >
> > 5 Were there any problems with their new chartplotter communicating with
> > the
> > Raymarine instruments and auto-pilot?
> >
> > Would appreciate any info you guys might have
> >
> > Irv Grunes
> > #851
> >
>
>
>
> --
> Chris Burti
> Farmville, NC
>
> - -----------------------------------------------------------------
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited. If you received
> this in error, please contact the sender and delete the material from any
> computer.
>



-- 
Chris Burti
Farmville, NC

- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.