[C320-list] Need drive belt

[Bill MacRae]

No, Callahan is a local power transmission company that cross referenced the belt.

> From: joe at dolphinmortgage.com> To: C320-List at Catalina320.com> Date: Mon, 14 Jul 2008 13:26:47 -0400> Subject: Re: [C320-list] Need drive belt> > What is Callahan? An Authorized Raymarine repair center?> Joe Barrett > > > ------------------------------------> Worldbanc Financial Group of Naples> Joseph T. Barrett jr.> Branch President> joe at dolphincommercialcapital.com> 9010 Strada Stell Court> Suite 209> Naples, Florida 34109> > In The Vanderbilt Galleria > tel: 239-597-2266> tel2:877-437-2262> fax: 239-597-7276> mobile: 239-777-1880> www.worldbancfinanceulp.com> ------------------------------------> > -----Original Message-----> From: c320-list-bounces at lists.catalina320.com> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Monte B.> Sent: Monday, July 14, 2008 1:31 PM> To: C320-List at Catalina320.com> Subject: Re: [C320-list] Need drive belt> > Bill,> > Have ordered a spare from Callahan and it is a spare as my original is still> at work amazingly enough. Thanks for the offer and the info.> > Monte> > -----Original Message-----> From: c320-list-bounces at lists.catalina320.com> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Bill MacRae> Sent: Saturday, July 12, 2008 7:54 AM> To: c320-list at catalina320.com> Subject: Re: [C320-list] Need drive belt> > Monte,> > 10MM doesn't sound right, I have a spare belt on the boat and will check the> size today. In fact, just email your address to me and I will send you my> spare.> > Bill> > > > > From: mjbc60 at sbcglobal.net> To: C320-List at Catalina320.com> Date: Fri, > > 11> Jul 2008 17:14:39 -0500> Subject: Re: [C320-list] Need drive belt> > Bill,>> > Still in a state of confusion. Called Callahan and spoke with Pat. She> found> that they had shipped belts to you and Michael but they were 10MM> instead of> 7.5 width. Will the 10MM width belt work in the autopilot drive> or is it the> wrong size?> > Monte> Laima #620> > -----Original> Message-----> From: c320-list-bounces at lists.catalina320.com>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Bill MacRae>> Sent: Wednesday, April 30, 2008 7:32 AM> To: c320-list at catalina320.com>> Subject: Re: [C320-list] Need drive belt> > > Hi Monte,> > You are right, I> misread ATS, It is actually AT5 750 075. It is the correct> size belt. I> took the number off the belt this past weekend and the 5> looked like a S.>> > The AT5 is a type of timing belt that has a 5MM pitch> 750 is the > > length> of 750MM > 075 is the width of 7.5MM> > Sorry for the confusion.> > Bill> >> From: mjbc60 at sbcglobal.net> To: C320-List at Catalina320.com> Date: Tue, 29>> Apr 2008 16:58:37 -0500> Subject: Re: [C320-list] Need drive belt> >>> Michael,> > Been reading the dialogue on the belt replacement issue. Called>> Callahan and> didn't order a belt because they have changed the part # and> I> am not sure> it is the same belt. (Don't think it's not, just don't > I> know) also have a> 4000+ wheelpilot and have never lost the belt so > I> it must be>> time for at> least a spare. If, after you receive these belts and can>> confirm that they> are correct, could you post it so us cheap guys can know>> we ordered the> correct spare. Bill, thanks for the info. Raymarine is not>> particularly> sensitive to this issue as when I asked for the belt > particularly> specs. I>> was told he> (name withheld to protect the guilty) would try to find out> and> I could call> back in a couple of days. This is the new version of> customer> support.> > Monte> Laima #620> > -----Original Message----->> From:> c320-list-bounces at lists.catalina320.com>>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael>>> Ferguson> Sent: Tuesday, April 29, 2008 8:41 AM> To:>> C320-List at Catalina320.com> Subject: Re: [C320-list] Need drive belt> >> Bill>> Thanks very much for the belt info. I contacted George and he is> shipping 3>> belts out for me and a friend with the same auto helm.> Sure do> appreciate> it> Michael> Nauti Clew 169> > > On 4/28/08 8:33 AM, "Bill> MacRae"> <seacalling at msn.com> wrote:> > > > > Michael,> > > > This is what> is printed> on the replacement belt. Ametric ATS 750 MADE IN> > FRANCE 075>> > > > This> works fine on my 1998. I don't know if they made any changes> over> the> >> years.> > > > You could check locally or give George a > over> the> >> call at> Callahan> Bearing> > 215-368-4000. I'm sure they could drop ship it to > Callahan> Bearing> > you.>> > > >> Bill> Date: Fri, 25 Apr 2008 12:24:34 -0400> From:> coralman at bellsouth.net>>> To:> > C320-List at Catalina320.com> Subject: Re:> [C320-list] Need drive belt>> >> Thanks> > Bill > I would appreciate it very> much> Michael> > > On 4/25/08> 8:19 AM,> "Bill> > MacRae"> <seacalling at msn.com> wrote:> > > > > A few years> ago, I had a> local> >> bearings and power transmission business match> > the> belt. It works great>> and> > it was half the cost. I think I have the> >> manufacurer and part> number on> the> > boat. I can check this weekend.> > >> > Bill> > > >>> From:> > coralman at bellsouth.net> To:> C320-List at Catalina320.com> Date: Thu,> 24> >>> Apr> > 2008 21:59:30 +0000>> Subject: Re: [C320-list] Need drive> belt> > > > Yes>> >>> > that is the kit> I need but they are sold out > belt> > > > Yes>> >>> > and> not making anymore. I> can> >>> > send it> in for service but what is> happening now is they upgrade the unit> to>> > >>> the new cable drive unit> for about 350.00. My unit is working now and> the>>> > >> belt is good. Just> wanting one for backup when this one breaks. The>> last>> > >> belt broke> with about 300 hours on it. > Thanks> Michael>> --------------> >>> >> Original message from "Joe Abbagnaro"> <jabbagna at gmail.com>:>> --------------> >>> > >> > > I see thsi service kit> on the Raymarine > --------------> >>> > >> > > site.>> > Is this what you> need> > ?>> >> > How old is the> ST4000 ?> > > >> > > >>>> >>>> http://www.raymarine.com/ProductDetail.aspx?SITE=1&SECTION=2&PAGE=913&PRODUC> > > T>> > >> =21> > 23> > > > Joe> > > > On 4/24/08, Joe Barrett wrote:> > > > T>> > >> >> >> Can't> you>> > >> just send the unit to Raymarine for repair?> > > > >> Joe> >> >>> > >> > >> >>> > ------------------------------------> > > Dolphin> Commercial> Capital> > >>> >>> > Joseph T. Barrett jr.> > > President> > > Commercial> Capital> > >>> >>> > >>>> joe at dolphincommercialcapital.com> >>> > >> > 9010 Strada Stell Court> > >>> Suite 209> > > Naples, Florida 34109> >> >> >> > >> >> In The Vanderbilt>> Galleria> > > tel: 239-597-2266> > >> > tel2:1-800-264-4119> >> >> > > Galleria> > > fax:>> 239-597-7276> > > mobile: 239-777-1880>> > >>> > >>>> www.dophincommercialcapital.com> > >>> ------------------------------------>>> > >> >> >> > > -----Original> Message-----> > > From:> >>> >> c320-list-bounces at lists.catalina320.com> > Message-----> > > >> >> >>> >> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of> Michael> >> >>> >>> > Ferguson> > > Sent: Wednesday, April 23, 2008 4:10 > Michael> >> >>> >>> > Ferguson> > > PM>> > > To:> >>> >> C320-List at Catalina320.com> > > Subject: [C320-list] Need> drive belt> > >>> >> >>> > >> I am in need of a st4000 drive belt # D160> from Raymarine. They no>> longer>> > >> >> > make the unit or supply the> belt. Hoping someone has one> or more> they>> > >> would> > > like to sell.>> > > Thanks> > > Michael> > >> Nauti Clew 169>> > >>> > >> >> >> > >> > > > > Thanks> > > Michael> > >> >> >> >> > >> >> >>> _________________________________________________________________> >>>> Express> > yourself wherever you are. Mobilize!> >> >>>> http://www.gowindowslive.com/Mobile/Landing/Messenger/Default.aspx?Locale=en> > > -U> > > > S?ocid=TAG_APRIL> >> >>> _________________________________________________________________> > In a>> rush? Get real-time answers with Windows Live Messenger.> >>>> http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh> > > _r> > ealtime_042008> > >> _________________________________________________________________> Back to> work after baby-how do you know when you're ready?>> http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-documentid=579> > 7498&ocid=T067MSN40A0701A=>> _________________________________________________________________> Use video conversation to talk face-to-face with Windows Live Messenger.> http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL> _Refresh_messenger_video_072008=> > 
_________________________________________________________________
Making the world a better place one message at a time.
http://www.imtalkathon.com/?source=EML_WLH_Talkathon_BetterPlace