[C320-list] Install 'cigarette lighter' charger at ignition switch housing
crashley at gte.net
crashley at gte.net
Tue Jun 3 06:43:30 PDT 2008
Bill,
The NAV instruments have their own circuit breaker on the main panel (at
least mine do) so you don't really need to add a fuse if you use that power
feed.
CRA
Rosebud #882
----- Original Message -----
From: "Bill Sloane" <southsoundbill at gmail.com>
To: <C320-List at catalina320.com>
Sent: Monday, June 02, 2008 10:13 PM
Subject: Re: [C320-list] Install 'cigarette lighter' charger at ignition
switch housing
> Thanks for all the advice Paul and others. It sound better to connect to
> the
> nav instruments power supply than the ignition switch. Where do I put the
> in-line fuse? Inside the housing of my ignition switch?
>
> Bill Sloane
> C-320 No. 554 'Endless Summer'
> Olympia, Washington
> On Sun, Jun 1, 2008 at 6:03 AM, <Vpweikel at aol.com> wrote:
>
>>
>> Bill,
>>
>> I did this several years ago for the same reason. Not hard or
>> complicated.
>> I used a small volt meter to find the battery side of the 12 volt supply
>> to
>> the nav instruments. I can check where I made the actual connections
>> next
>> time I'm at the boat and let you know. My GPS hooked up direct without
>> having
>> to use a "cigarette" style plug, but yours would be basically identical.
>> Make sure you put an in-line fuse in the wiring.
>>
>>
>> Paul Weikel
>> Second Chance
>> #361
>> Georgetown, MD
>>
>>
>>
>>
>>
>>
>> **************Get trade secrets for amazing burgers. Watch "Cooking with
>> Tyler Florence" on AOL Food.
>> (http://food.aol.com/tyler-florence?video=4&?NCID=aolfod00030000000002)
>>
>
More information about the C320-list
mailing list