[C320-list] water pump keeps cycling on

[David J Cardoza]

This happens to me whenever the filter gets dirty on the input side.  I rebuilt the pump the first time only to have it keep happening until I cleaned out the screen in the little clear plastic filter that came with the boat.  Pump didn't need a rebuild live (spend) and learn.
 
David J Cardoza
dave at avaloncon.com

________________________________

From: c320-list-bounces at lists.catalina320.com on behalf of Jack Fitzgibbon
Sent: Sun 6/29/2008 3:44 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] water pump keeps cycling on



We also had a leak at the water inlet on the Hot Water Heater.  The nylon fitting was cracked, changed it out and stopped the leak.  Initially very hard to detect as is it was wrapped with Teflon tape.  Enough to cycle the pump and empty the tank in about a weeks time.

jack
#441




-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com]On Behalf Of R Airis
Sent: Sunday, June 29, 2008 3:05 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] water pump keeps cycling on


I have hull #266 &  had that problem. It was the hot water tank that had a
small leak on the bottom of the tank. Had to replace the tank. When I
removed the tank it had gunk in the bottom, problely form poor water quality
in the Gulf Islands and Desolatoin Sound area of British Columbia.

Bob & Sheila....   Hale Kai 2  #266
Seattle,Wa.

----- Original Message -----
From: "HOLLY DAVIS" <hdavis787 at hotmail.com>
To: <c320-list at lists.catalina320.com>
Sent: Sunday, June 29, 2008 10:25 AM
Subject: [C320-list] water pump keeps cycling on



Hello,
I recently bought a 1995 320 and find that the water pump keeps turning on
for a few seconds about every thirty seconds.  I've searched the archives,
but can't find this addressed anywhere.  The shutoff valves are located
under the sink.  I think this is a good thing as I saw the discussion about
moving them there.  However the forward one is frozen in the open position
and the aft one in the closed position.  I can not seem to find anywhere
that has these particular valves.  I found some that say they are 15mm, but
my diagram says they are 1/2 inch.
Any information will help.  Thank you.  Holly
Andiamo - Hull 261


_________________________________________________________________
Need to know now? Get instant answers with Windows Live Messenger.
http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_Refresh_messenger_062008=