[C320-list] Head Shower Pump

[Chris Burti]

> No, I did not check the thruhull.  Where is it?
>            Just below the pump...follow the hose down.
> Could I just remove the hose from the pump side out and blow thru it to be
> sure its clear??
>             Yup! And if it is not blocked too bad, your dock hose may
> beable to clear it.
> Except for people asking me to check the filter gasket, yours is the first
> other suggestion.
> I'll check it Monday.
>
> Irv Grunes #851
>
> On Thu, May 8, 2008 at 9:29 PM, Chris Burti <clburti at gmail.com> wrote:
>
> > Irv,
> > I really hate to ask this, but it wasn't on your list and nobody else
> > suggested it.
> >
> > Did you check your through hull?
> >
> > Ours were plugged last year with marine growth and nothing worked until I
> > cleaned them out.
> >
> > On Wed, May 7, 2008 at 8:22 PM, Irving Grunes <igrunes at gmail.com> wrote:
> >
> > > Hi,
> > > Was at Isle of Wight today and tried to empty the shower sump and
> fridge
> > > sump.
> > >
> > > Pump motor runs, filter is clean, I have blown the intake hose and it
> is
> > > clean.
> > > And I have moved the two way valve in each direction.
> > >
> > > I have poured water into both sumps and just wanted to clear any
> residual
> > > antifreeze that may be in the system.
> > >
> > > But pump does not suck out either of the sumps.
> > >
> > > Is there something that has to be done to the anti-siphon loop for the
> > > pump?
> > >
> > > If so where is it and how do you reach it and then what do you do????
> > >
> > > Irv Grunes
> > > #851
> > >
> >
> >
> >
> > --
> > Chris Burti
> > Farmville, NC
> >
>



-- 
Chris Burti
Farmville, NC