[C320-list] new boat number

[John Frost]

Way to go Barb!
I think the battens will make a difference

Suggest you have them align engine to prop AFTER it splashes. Mine was done
before and I have a mid RPM vibration that I will be chasing down. All
guidance I see says it must be done in water after mast is tuned because
hull flexes very differently on hard stand.

A couple of safety issues to check based on our delivery are sealing the
wires going into the propane locker to prevent leakage into bilge and
insulating the connectors for air conditioning AC wiring inside the circuit
panel (factory wires are properly insulated with plastic box). 

Heading to the lake now. Will spend the night on the hook under the stars.
Bless Frank Butler.

John Frost
2007 C320 MKII, Hull # 1118, "KOKOMO"
Lake Guntesville, AL

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Barb & Bob
Uhlman
Sent: Saturday, May 24, 2008 9:10 AM
To: C320-List at Catalina320.com
Subject: [C320-list] new boat number

Our new boat should arrive in St. Louis any day now.  It will be #1158 for
those who asked.  For those keep up with the 320 evolution, one thing
somewhat new on it will be in-mast with vertical battens.  After bottom
painting, some elec. installation, etc., it will splash in Carlyle Lake, IL,
the first or second week of June.

Barb Uhlman