[C320-list] ST 4000 help....again...

[Pat Moriarty]

Interference with throttle I believe was the problem. I have had 
trouble with the screws for the anchor plate on the binnacle coming 
loose so use some Loc-tite.

At 02:02 PM 9/9/2008, you wrote:
>Thanks Pat,
>
>Would it not fit on the right? The reason I ask is I'm trying to avoid
>rewiring...
>
>Regards,
>
>Jon Vez
>Solstice #582
>
>-----Original Message-----
>From: c320-list-bounces at lists.catalina320.com
>[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Pat Moriarty
>Sent: Tuesday, September 09, 2008 2:25 PM
>To: C320-List at Catalina320.com
>Subject: Re: [C320-list] ST 4000 help....again...
>
>I put the motor on the left like everyone talked about back then and
>no problems.
>
>Pat #130
>
>At 12:59 PM 9/9/2008, you wrote:
> >Hello all,
> >
> >
> >
> >I posted an earlier email looking for some help with my 4000.no luck. I had
> >to bite the bullet and buy a MKII wheel bracket. I can return it if it
> >doesn't fit so my question is has anyone upgraded from the black to the
>grey
> >wheel pilot and if so does it fit? I seem to recall someone saying the
> >engine stop gets in the way of the motor. If anyone has any experience with
> >this upgrade please advise.Thanks in advance.
> >
> >
> >
> >Regards,
> >
> >
> >
> >Jon Vez
> >
> >Solstice #582
>
>Pat Moriarty
>PSI Urethanes Inc
>PH: 800-888-5156  Fax: 512-837-8733
>Please visit our web site at
>www.psiurethanes.com

Pat Moriarty
PSI Urethanes Inc
PH: 800-888-5156  Fax: 512-837-8733
Please visit our web site at
www.psiurethanes.com