[C320-list] Catalina Custom Exhaust Elbow

[Allan S. Field]

Jon - I am unsure what you mean by "standard"?  I was able to purchase a
perfect fit, drop-in replacement unit from Bay Shore for my Yanmar 3GM30F.
Walter contacted me off-line later last evening and I suggested that he
remove his assembly and take it up to Bay Shore (he lives in the area). -
Allan

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jon Vez
Sent: Tuesday, August 25, 2009 10:07 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Catalina Custom Exhaust Elbow

Alan,

Did you replace a Catalina Exhaust or was yours already standard? Judging by
your hull number, they may have made the switch by then...

Regards,

Jon Vez
Solstice #582

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Allan S. Field
Sent: Tuesday, August 25, 2009 9:39 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Catalina Custom Exhaust Elbow

Walter - I got everything I needed from Bay Shore Marine in Annapolis.
Maybe have them ship it to me?  (That is an inside joke for the rest of
you!)

Mixing Elbow - 124070-13520 @ $169.33
Joint - 104214-13580 @ $28.79
Exhaust Elbow - 128370-13610 @ $130.39
Gasket - 128370-13201 @ $4.92

Hope this helps.

Allan S. Field
Sea Shadow - #808
Herrington Harbour South
Rosehaven, MD

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Walter
Schaffer
Sent: Tuesday, August 25, 2009 6:02 PM
To: C320-List at Catalina320.com
Subject: [C320-list] Catalina Custom Exhaust Elbow

Can anyone tell me how I can get a new Catalina Custom Exhaust Elblow. Mine
has developed a pin hole is is rusting bad... There is a pix of one on the
Assn. wedsite under tech notes.  I contacted local Yanmar dealer in
Annapolis... and was told they have no such part.After taking heat packing
off mixing elbow, it looks like it connects on engine end to a simple
exhaust elbow. And the other end hooks to muffler hose.... Engine water
enters horse shoe mixing elbow...If anyone has dealt with replacement, I
would appreciate some info.Thanks, Walt Schaffer Bohemian II, #515