[C320-list] genoa cars

[pat reynolds]

yes you have to remove them.  make sure you have the pieces of track they should have come with so the ball bearings don't all come out.  If you don't, build a little cresent tape barrier at the end of the track to catch most of them.  They are pretty small and given the pitch of the deck tend to roll towards the stern

--- On Sat, 12/12/09, bruceheyman at cox.net <bruceheyman at cox.net> wrote:

> From: bruceheyman at cox.net <bruceheyman at cox.net>
> Subject: Re: [C320-list] genoa cars
> To: C320-List at Catalina320.com
> Date: Saturday, December 12, 2009, 10:48 PM
> Pat,
> Thanks for the heads up.  Do you have to remove them
> from the track to be able to remove the screws and apply
> lock tight?
> Thanks,
> Bruce
> Somerset 671 SoCal
> ------Original Message------
> From: pat reynolds
> Sender: c320-list-bounces at lists.catalina320.com
> To: C320-List at catalina320.com
> ReplyTo: C320-List at Catalina320.com
> Subject: [C320-list] genoa cars
> Sent: Dec 12, 2009 16:10
> 
> Those who have the garhauer genoa sliding cars you will
> notice several small screws on the underside of the
> car.  It is wise to make sure these have loctite as
> they can work loose and jam the car after years of use.
> 
> 
>       
> 
> 
> Sent via BlackBerry by AT&T
>