[C320-list] Portlight information...

[Jon Vez]

Thanks Michael...do you happen to know the size? Someone on the list thought
they were 2mmx12mm....

Regards,

Jon

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael
Ferguson
Sent: Thursday, July 30, 2009 12:20 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Portlight information...

Jon I purchased mine for ACE hardware and work great.
Michael Ferguson
Nauti Clew 169


On 7/30/09 12:12 PM, "Jon Vez" <jonvez at comcast.net> wrote:

> I just returned from a couple of weeks on the boat and the good news
> regarding this year's New England weather is that I found all of my leaks!
> With that said, I need some information on the lewmar portlight O-rings. I
> have the 'old style' ports and need to determine if they are Size 0 or
Size
> 1 and what size the O-Rings are. I know they are metric and I'm hoping to
> find somewhere local to buy them. Also, can anyone describe how to remove
> the 'dogs' to get at the O-Rings?
> 
>  
> 
> One other curious thing that I can't quite figure out-my fuel vent doesn't
> seem to be working properly. I measure my fuel usage in hours and am quite
> sure as to the amount I need. During this trip when the tank had about 15
> gallons in it, the vent started spitting fuel. At first I thought it was
> bubbles from pouring too fast, but I use a filter and even after pouring
> very slowly, this still happens. Any suggestions other than removing the
> vent and inspecting, which I plan to do? I don't think it's the vent
because
> when I changed fuel filters a few weeks ago and primed the racor, I could
> hear air passing out of the vent..Thanks in advance..
> 
>  
> 
> Regards,
> 
>  
> 
> Jon Vez
> 
> Solstice #582
>