[C320-list] Bomar Hatches

[Scott Thompson]

And lots of info about their products on their website at

http://www.pompanette.com/bomar

I'm not sure what you mean by the Lexan pin, but you can purchase 
various parts, including replacement hinges, directly from Bomar.  See 
this page...

http://tinyurl.com/nd2eyy

Scott Thompson
Surprise, 653

Karl Mielenhausen _/) wrote:
> Pompanette, LLC
> Bomar Division
> PO Box 1200
> South West Street
> Charlestown, NH 03603
> tel: (603) 826 5791
> fax: (603) 826-4125
> 
> On Sun, 28 Jun 2009 22:34:51 -0400, <momvan at aol.com> wrote:
> 
>> If I could find a contact for company  would inquire........I thought 
>> maybe mine was pulled out due to someone sitting on it or falling on 
>> it........interesting.
>>
>>
>> -----Original Message-----
>> From: Jon Vez <jonvez at comcast.net>
>> To: C320-List at Catalina320.com
>> Sent: Sun, Jun 28, 2009 7:28 pm
>> Subject: Re: [C320-list] Bomar Hatches
>>
>>
>>
>>
>>
>>
>>
>>
>> I have this problem. Mine about 40% 'out', but I have not been able to 
>> figure
>> out how to get it back in. I've tried several things, but put so much 
>> pressure
>> on it with no sign of movement that I backed off so I didn't break the 
>> hinge. I
>> will wait until it comes all the way out and try to figure out the best
>> solution--if you come across a way to fix, please post....thanks...
>>
>> Regards,
>>
>> Jon Vez
>> Solstice #582
>>
>> -----Original Message-----
>> From: c320-list-bounces at lists.catalina320.com 
>> [mailto:c320-list-bounces at lists.catalina320.com]
>> On Behalf Of momvan at aol.com
>> Sent: Saturday, June 27, 2009 3:22 PM
>> To: C320-List at Catalina320.com
>> Subject: [C320-list] Bomar Hatches
>>
>> Does anyone have a home number for Bomar Hatches......anyone ever have 
>> the lexon
>> pin work its way out of the hatch ( located on forward hatch ) ?
>>
>>
>> -----Original Message-----
>> From: Karl Mielenhausen _/) <c320 at suddenlink.net>
>> To: C320-List at catalina320.com
>> Sent: Sat, Jun 27, 2009 1:22 pm
>> Subject: Re: [C320-list] Holding tank filter
>>
>>
>>
>>
>>
>>
>>
>> Rick,
>>
>>
>> I just replaced the sanitation hoses on Silver Lining (hull 690) and 
>> the job
>> went fairly easily, especially using the advice from Warren Updike 
>> that he gave
>> as=2
>> 0part of his larger holding tank project (see the upcoming August 
>> Mainsheet).
>>
>>
>> After some research (try googling "head mistress peggy hall" or go 
>> here...
>>
>> http://forums.sbo.sailboatowners.com/forumdisplay.php?f=31),
>>
>> I chose the white Trident 102 hose going from the toilet to the tank 
>> (6') and
>> the black Trident 101 hose for the rest (8') which included going up 
>> to the deck
>> fitting. I also replaced the piece to the thruhull (be advised this is 
>> a smaller
>> diameter on my boat, 1").
>>
>> I did not change out the vent tube however, as it is difficult for me 
>> to access
>> the back of the vent fitting without taking apart the medicine cabinet 
>> and the
>> two vented loops therein.
>>
>>
>> I was surprised to get a very good price on the hose from 
>> SailboatOwners.com,
>> usually they are a more expensive vendor.
>>
>>
>> Let me know back-channel if you want an advanced copy of the August 
>> article.
>>
>>
>> Karl
>>
>>
>>
>>
>> On Fri, 26 Jun 2009 14:05:55 -0400, Rick20Evans 
>> <ericstillwellevans at gmail.com>
>> wrote:
>>
>>
>>> So everyone else has the problem with the smell?
>>
>>>
>>
>>> My surveyor told me that the black rubber hose from the head to the 
>>> tank > is
>> the cause. So its on my list to replace the black rubber hose with a > 
>> white
>> coated synthetic hose.
>>
>>>
>>
>>> Anyone else have this problem and remedy with the fix I mentioned?
>>
>>> Sent via BlackBerry from T-Mobile
>>
>>
>> --Karl Mielenhausen
>>
>> Catalina 320 Hull 690
>>
>> New Bern, NC
>>
>>
>> Join us August 7-9, 200920at Marina Del Rey, CA for our annual 
>> Catalina 320IA
>> Regatta and Annual Meeting.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
> 
> 
> 

-- 
Scott Thompson
Surprise, #653