[C320-list] Interior Varnish

[Jeff Hare]

I most recently been using the Cedar Penofin in the red/gold can because I
also use it on my ironwood deck.

-Jeff

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Chris Descher
Sent: Monday, March 02, 2009 6:16 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Interior Varnish

Do you know which color of Penofin you use on your hatch boards?

Chris Descher

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com]On Behalf Of Karl
Mielenhausen _/)
Sent: Sunday, February 22, 2009 9:47 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Interior Varnish


Here are two references from my personal archives that might be helpful....
http://pages.suddenlink.net/kmielen/C320Docs/Hatchboard.htm
http://pages.suddenlink.net/kmielen/C320Docs/InteriorFinish.htm

The Target coating that was used on our new boats is no longer available.
The replacement is Oxford HYbriVar WB-Alkyd Varnish

Here are some notes from David Nolte last year....

They are at www.targetcoatings.com

As you'll see, there is an area for technical info, a shopping area,
and a forum and a blog, hosted by their guru, Jeff Weiss. I actually
just spoke with him yesterday, I'm tackling in the project as well.

Here's what I bought to do my sole and sidewalls:

Oxford HYbriVar WB-Alkyd Varnish: Satin 1 Gallon

It's water based. It's on its way to me, I hope to test it in the
next week or two. They also have semi-gloss & high gloss.

His instructions were to lightly sand, no higher than 220 grit (my
sole is pretty beat up - previous owner!), wipe down with a damp
cloth (water, no chemicals like a tack cloth), and apply. You can
brush or spray. I'll brush.


Regards,
Karl Mielenhausen


On Sun, 22 Feb 2009 21:12:28 -0500, Tim <chillinonahd at yahoo.com> wrote:

> I read a fairly dated article on the site about the varnish used on the
> interior woodwork and then went searching for this product with no luck.
> Anyone out there have updated info? I have some touch up work near the
> sink area (someone left a wet towel there) to take care of this spring.
>  
> Also, I was considering putting something more than teak oil on the
> hatch boards, suggestions here as well.
>  
> Thanks
> Tim
> Calypso
> #603
>
>
>



--
Karl Mielenhausen
Catalina 320 Hull 690
New Bern, NC

Join us August 7-9, 2009 at Marina Del Rey, CA for our annual Catalina
320IA Regatta and Annual Meeting.