[C320-list] 12v lighting

[Chris Burti]

P.S. forget the lights... what you always have is simply a hot wire from the
breaker to your point of measurement.

On Mon, May 4, 2009 at 3:36 PM, Chris Burti <clburti at gmail.com> wrote:

> There is a break between where you are getting a hot reading and ground.
>
>
> On Mon, May 4, 2009 at 1:33 PM, Chris Descher <cdescher at cedtulsa.com>wrote:
>
>> This weekend, I found that all the interior 12v lighting on the starboard
>> side does not work.  Lights on the port side are fine.  After taking a lot
>> of things apart and testing, what I know is that the ground wire is no
>> longer ground, it's hot, just like the hot wire.  It is switched by the
>> cabin lights breaker.  I am thinking that it somehow lost its connection
>> to
>> the ground terminal and this was replaced by a connection to the positive,
>> because, if it had both, something should short or burn or trip.
>>
>> Any ideas?
>>
>>
>> Chris Descher
>> #500
>>
>>
>
>
> --
> Chris Burti Farmville, NC
>



-- 
Chris Burti Farmville, NC