[C320-list] Feathering Props

[Jon Vez]

You can also use transducer paint--especially since one of those little
bottles lasts for about 10 years--and it's water based...

Regards,

Jon Vez
Solstice #582

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
bruceheyman at cox.net
Sent: Monday, October 12, 2009 9:48 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Feathering Props

Ed,
In stead of bottom paint you can use finger nail polish (color of your
chosing).  We've been doing that for the last few years and the zinks have
been doing a much better job of staying tight.
Bruce
Somerset 671 SoCal
Sent via BlackBerry by AT&T

-----Original Message-----
From: Ed Edwards <edandsue.pt at gmail.com>
Date: Thu, 8 Oct 2009 22:19:58 
To: <C320-List at catalina320.com>
Subject: Re: [C320-list] Feathering Props

Our boat has a MaxProp and we have owned the boat for 4 years.  It has been
great problem free, backing port or starboard is no concern especially with
our turning radius.  The prop always feathers, I check periodically when
racing.

The only problem that I have noticed is the propeller zinc.  We are in a
fairly hot marina and I change zincs at 8 months.  The zinc around the
anchoring bolts is the thinnest part of the zinc.  Once the zinc had fallen
off due to corrosion,probably.  Other times the zinc is usually near
failure.  Last Spring I had the bottom painted professionally and the shop
recommended that they use bottom paint around the bolt holes.  I had a diver
clean the bottom and check zincs two weeks ago.  He specifically checked the
prop zinc to see how the bottom paint was working.  The area around the bolt
holes is holding up and the zinc is being  (eroded, corroded, electrolyzed?)
used up.

>From this experience I recommend using bottom paint around the bolt holes
if
you are having similar problems.

If anyone sees a problem with this please let me know, I don't need to add
to my list of headaches.

Ed Edwards,  REBOUND  ,   #347




On Thu, Oct 8, 2009 at 5:51 AM, Melissa&Larry Leibman <
theleibmans at verizon.net> wrote:

> Hi all,
>
> I've read through the archives regarding peoples opinions/experiences with
> a variety of propeller options for the 320. Two props I haven't seen too
> much feedback on here are the MaxProp and VariProp (and the newer
> VariProfile). If anyone has any firsthand experience with these on the 320
> I'd appreciate their thoughts/comments.
>
> Thanks,
>
> Larry
> Easy Going/609
>