[C320-list] Raymarine X-5 autopilot retrofit

[Joseph A Tamucci]

I just replaced my Raymarine ST-4000 autopilot with an X-5.  Be aware the
ring and retainer post on the wheel is larger in diameter and will interfere
with the engine pod instrument panel (1999 model year #619).  Also, all
wires must go to the computer.  Do not hook up the NMEA connection on the
control head (as per Raymarine tech.)

 

 

I am solving the problem by drilling out the hole for the retaining post  in
the wheel,  cutting down, and filing down the retaining post, and getting
some 1" ID washers so the wheel does not screw in as far.  Oh yes, the
activation lever was also to long and hit the engine pod also , so I had to
cut and file it down.  The boat is on the hard still so it still needs
calibration once in the water. 

 

I would be interested to hear from others on these subjects that have
installed the X-5 and what issues they had.

 

Joe Tamucci  #619