[C320-list] Patching Interior Woodwork
jim brown
jbrown5093 at yahoo.com
Fri Apr 30 15:00:31 PDT 2010
An alternative is to use a similar color fill stick. They are the sticks that furniture restorers use. You heat them and fill fill the hole while the stuff is soft. A very slightly darker shade always is less noticeable. You then use a darker one and just make the grain pattern to match the surrounding wood by using a knife blade. Buff lightly with 60 steel wool and polish. Works great on furniture-never did it on the boat.
Jim Brown
--- On Thu, 4/29/10, Joe Abbagnaro <jabbagna at gmail.com> wrote:
From: Joe Abbagnaro <jabbagna at gmail.com>
Subject: Re: [C320-list] Patching Interior Woodwork
To: C320-List at catalina320.com
Date: Thursday, April 29, 2010, 6:26 PM
Dean
Looks like you have done this or have a lot of woodworking experience.
Thanks for the suggestions / input
Joe
On Thu, Apr 29, 2010 at 10:46 AM, Dean Vermeire <dean at vermeire.us> wrote:
> First, don't drill it out any larger than you have to. If you do drill it
> out, use a Forstner bit to get a clean hole. You might put some blue tape
> over before drilling, just to be sure you get a clean edge. Then, don't use
> a dowel for the plug. A dowel would give you end grain, which will not
> match the face grain around it and would take a stain or varnish
> differently. If you have a plug cutter, cut a plug from something as close
> to teak as possible (e.g. teak, iroko, mahogany, etc.). Otherwise, just buy
> some (e.g.
> http://www.defender.com/product.jsp?path=-1|10918|296161&id=101599). Glue
> it with CA glue or something like Titebond III. Use a flush cut saw or good
> sharp chisel to trim it flush. I would use a card scraper , rather than
> sanding, to get it smooth. Finish.
>
> Joe Abbagnaro wrote:
>>
>> Anyone have any luck or suggestions on how to patch interior finish
>> There is a TV mounted to the bulk head we would like to remove.
>> Has some screw holes that need to be patched and finished.
>> I know we can hang a picture but would like to fix the holes.
>>
>>
>>
>>
>
>
>
More information about the C320-list
mailing list