[C320-list] Hatch

[Michael Ferguson]

Jeff
Thanks
Michael



On 12/3/10 9:11 AM, "Jeff Hare" <catalina at thehares.com> wrote:

> I noticed that many cat models above the 320 use the stainless version.
> 
> I may look at these if/when I replace mine.
> 
> Also consider connecting a drain hose to the drain to keep leaks from dripping
> on the steering quadrant.  People have had steering corrosion problems due in
> part to this if I recall correctly.
> 
> -Jeff
> -----Original Message-----
> From: "Jon Vez" <jonvez at comcast.net>
> Sender: c320-list-bounces at lists.catalina320.com
> Date: Fri, 3 Dec 2010 07:31:05
> To: <C320-List at Catalina320.com>
> Reply-To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Hatch
> 
> Sorry for the confusion--I bought the ring/cover and just used the cover. I
> don't believe you can just buy the cover--
> 
> Regards,
> 
> Jon Vez
> Solstice #582
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
> wflowe3 at aim.com
> Sent: Thursday, December 02, 2010 12:26 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Hatch
> 
> 
>  Where did you find just the cover?
> 
>  
> 
> 
>  
> 
>  
> 
> -----Original Message-----
> From: Jon Vez <jonvez at comcast.net>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Thu, Dec 2, 2010 10:43 am
> Subject: Re: [C320-list] Hatch
> 
> 
> Michael,
> 
> You can pick them up anywhere. WM, Defender etc. They are Bomar access
> hatches. There are several sizes, but I believe ours are 8". Not 100% sure,
> but I can look it up if you don't have a chance to measure yours. Before you
> replace the whole thing, first try to recaulk the screws around the frame
> part and clean up the gasket and just use the new access cover--I did this
> and it worked. When the time comes, I will replace the frame as well--they
> come together so I'm saving the frame for when the time comes...Good luck..
> 
> Regards,
> 
> Jon Vez
> Solstice #582
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael
> Ferguson
> Sent: Thursday, December 02, 2010 11:30 AM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Hatch
> 
> I need to replace the emergency tiller access hatch on Nauti Clew, hull
> #169. Contacted Catalina parts and have not heard a response yet. Does
> anyone on the list know where I might find one that will fit.
> Thanks
>  Michael Ferguson
> 
> 
> 
> 
>  
>