[C320-list] Hatch

[Pat Ireland]

There is a larger Catalina on our dock, a 36 I believe, that has what looks
like a SST cover assembly for the rudder port.  Since the cover gets lots of
stress from the helmsperson standing and walking on it, it seems like a
stronger port cover would be a better solution.  Has anyone looked into this
option?

Pat, 801

On Fri, Dec 3, 2010 at 4:31 AM, Jon Vez <jonvez at comcast.net> wrote:

> Sorry for the confusion--I bought the ring/cover and just used the cover. I
> don't believe you can just buy the cover--
>
> Regards,
>
> Jon Vez
> Solstice #582
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
> wflowe3 at aim.com
> Sent: Thursday, December 02, 2010 12:26 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Hatch
>
>
>  Where did you find just the cover?
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Jon Vez <jonvez at comcast.net>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Thu, Dec 2, 2010 10:43 am
> Subject: Re: [C320-list] Hatch
>
>
> Michael,
>
> You can pick them up anywhere. WM, Defender etc. They are Bomar access
> hatches. There are several sizes, but I believe ours are 8". Not 100% sure,
> but I can look it up if you don't have a chance to measure yours. Before
> you
> replace the whole thing, first try to recaulk the screws around the frame
> part and clean up the gasket and just use the new access cover--I did this
> and it worked. When the time comes, I will replace the frame as well--they
> come together so I'm saving the frame for when the time comes...Good luck..
>
> Regards,
>
> Jon Vez
> Solstice #582
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael
> Ferguson
> Sent: Thursday, December 02, 2010 11:30 AM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Hatch
>
> I need to replace the emergency tiller access hatch on Nauti Clew, hull
> #169. Contacted Catalina parts and have not heard a response yet. Does
> anyone on the list know where I might find one that will fit.
> Thanks
>  Michael Ferguson
>
>
>
>
>
>
>