[C320-list] AGM Batteries and Battery Charger
Robert Tiernay
bob.tiernay at gmail.com
Thu Jan 28 05:12:32 PST 2010
Bruce
Yes I have an balmar external regulator its set to AGM
here are a couple of excepts from the Lifeline manual (september 2009)
"The battery is fully charged when the
current drops below 0.5% of the battery's rated capacity (0.5A for a 100Ah
battery)."
"Time to Reach Full Charge = [(DOD/100) x Rated Capacity (Ah) ? Rated Output
of Charger(Amp)] + 2 hours.
For example, charging a 100Ah battery at 50% DOD with a 25A charger would
take:
[(50/100) x 100 ? 25] + 2 = 4 hours"
>
I find that the equation to estimate the charge time overestimates for large
battery sizes - people run into troubles when they don't take the current
low enough. With 2 D's @220 AH and a 100A charge you're looking at 4 hours
with a 50A charger about 6. You don't halve the charge time by doubling the
charging capacity.
Bob Tiernay
Windwalker
More information about the C320-list
mailing list