[C320-list] Head issue
wflowe3 at aim.com
wflowe3 at aim.com
Mon Jul 5 08:19:05 PDT 2010
You can find a schematic of the toilet at the Torresen Marine website. The valve is located behind and at the base of the flush pump where the discharge hose connects to the pump. You remove 2 screws and a cap, housing the rubber joker valve, comes apart. Just pull out the old one and drop in the new one. I just replaced mine last week and it takes about 5 minutes.You can get the valves from about any marine store or order them on line from numerous sources. They cost in the range of $15 and it is a good idea to keep a spare on the boat.
-----Original Message-----
From: ericstillwellevans <ericstillwellevans at gmail.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Mon, Jul 5, 2010 9:43 am
Subject: Re: [C320-list] Head issue
Where is the joker valve and where do I get one
Thanks
Rick
Sent via BlackBerry from T-Mobile
-----Original Message-----
From: wflowe3 at aim.com
Sender: c320-list-bounces at lists.catalina320.com
Date: Mon, 5 Jul 2010 10:35:39
To: <C320-List at Catalina320.com>
Reply-To: C320-List at Catalina320.com
Subject: Re: [C320-list] Head issue
You may need to replace the joker valve, if it malfunctions, contents from the
holding tank can flow back into the toilet bowl. Pump the tank and replace the
valve. It's easy and cheap.
-----Original Message-----
From: ericstillwellevans <ericstillwellevans at gmail.com>
To: C320-List <C320-List at catalina320.com>
Sent: Sun, Jul 4, 2010 3:21 pm
Subject: [C320-list] Head issue
Yesterday as I was closing the boat I noticed the head was filled with water. I
turned off the through hull and it seemed to stop.
Anyone have this issue?
Do I need to rebuild the head pump?
Rick 724
Sent via BlackBerry from T-Mobile
More information about the C320-list
mailing list