[C320-list] Wiring in mast

Dingo Is Talent dingoistalent at bigpond.com
Mon Jun 28 14:08:39 PDT 2010


PAUL
Should be a square plastic cover on port side of mast..that is unless they
have changed it? 
This is where access is gained

Ron (DINGO) Reddingius - 1150   Perth Australia..... 


Kind regards & Thanks     
Ron (DINGO) Reddingius 
Executive Producer 
HOME in WA 
          
Mbl 0417 279 103
Ph/Fax (08) 9246 5442
 
ADDRESS
Dingo Is Talent 
15 Willow Bank Entrance
Gwelup WA 6018
 
Before responding on email perhaps give me a call?

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of pat reynolds
Sent: Monday, 28 June 2010 11:22 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Wiring in mast

I have a 95 320 purchased new which has a hole about 1 1/2 inches in
diameter in the front of the mast about three inches from the bottom  which
allows me to pull out the wiring bundle. 


--- On Sun, 6/27/10, Paul <paiscool at aol.com> wrote:

> From: Paul <paiscool at aol.com>
> Subject: [C320-list] Wiring in mast
> To: c320-list at catalina320.com
> Date: Sunday, June 27, 2010, 11:52 AM
> Can someone tell me how to get to my
> mast wiring at the bottom of the mast other than pulling the mast 
> again?The Hunter I had had an access panel under the mast inside the 
> cabin but all I see is the 2 cabin lights on either side of the 
> mast.It is a 95 Catalina 320.Thanks.
> 


      




More information about the C320-list mailing list