[C320-list] Settee Table

[Robert Seastream]

My plan is go to Home Depot (or someplace similar) and buy a round  
piece of wood (or one large enough to be cut into a round piece) three  
feet in diameter.  Then unscrew the original table top, center the new  
one over the post and fasten it down.  Just about any sort of wood  
should do.

Robert Seastream
Intuition # 906


On May 17, 2010, at 8:37 AM, amshd2 at aol.com wrote:

>
> John
>
> I found a small round Teak table at a local store in Annapolis for  
> under $80.  I removed the legs, put my own finish on it and used the  
> base from original table.  Looks great.
>
> I have seen the same table and others that will work carried by  
> different dealers at boat shows and around town.
>
> Tony
>
>
>
>
>
>
> -----Original Message-----
> From: John Frost <john at frostnet.net>
> To: C320-List at Catalina320.com
> Sent: Mon, May 17, 2010 8:18 am
> Subject: Re: [C320-list] Settee Table
>
>
> I want to do the same but can't find a suitable small table. Any  
> suggestions
> or sources?
> Happy Sailing!
> John
> 007 C320MKII
> ull 1118
> untersville, AL
>
> -----Original Message-----
> rom: c320-list-bounces at lists.catalina320.com
> mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
> flowe3 at aim.com
> ent: Wednesday, May 12, 2010 2:55 PM
> o: C320-List at Catalina320.com
> ubject: Re: [C320-list] Settee Table
>
> I don't convert my settee table for sleeping room so I removed it  
> and put
> n a smaller solid wood table top. It really opens things up below  
> and there
> s still plenty of room to dine.
>
>
>
>
> -----Original Message-----
> rom: Dean Vermeire <dean at vermeire.us>
> o: C320-List <C320-List at Catalina320.com>
> ent: Wed, May 12, 2010 10:52 am
> ubject: Re: [C320-list] Settee Table
>
> eneer.
> Max Ruddy wrote:
> Does anyone know whether the settee table is solid wood or a veneer.
> rying
> o refinish and want to know how deep I can go with my palm sander?
>
> Thanks,
>
> Max
> Sail La Vie
> #270
>
>
>
>
>
>
>
>
>
>