[C320-list] Jabsco manual head

[Barry Lambert]

Take Peggy's advice and replace with the Raritan PHII!!!!  The single best 
upgrade I've done.  Fairly simple to replace but you will need to drill new 
attachment bolt pattern.

--------------------------------------------------
From: "Chris Burti" <clburti at gmail.com>
Sent: Tuesday, October 26, 2010 8:35 AM
To: <C320-List at catalina320.com>
Subject: Re: [C320-list] Jabsco manual head

> Ours has done the same thing, It is the second head with a pump
> replacement in between. I am, through with Jabsco heads and taking
> Peggy Hall's advice to go to a Raritan PHII.
>
> Below is a link where you can save quite a bit of money by ordering a
> simple pump upgrade and using your existing bowl. I understand that
> the intake hose may need to be replaced as it might be a bit too
> short. This is a good time to replace the discharge hose as well.
>
>
> http://shop.catalinaowners.com/detail.htm?group=1357&cat=3702
>
> On Tue, Oct 26, 2010 at 9:11 AM, james_delong
> <james_delong at bellsouth.net> wrote:
>> For the first time since I've owned the 320, I didn't use it for a five 
>> month period due to rotator cuff surgery.  When I put it to bed the head 
>> worked fine.  Now, after inactivity, it will not draw in raw water.  If I 
>> add water into the bowl, if flushes fine.
>>
>> Maybe some of you who winterize boats experience the same thing after 
>> months of no use.  How do you get the head to draw in raw water?
>>
>> Thanks,  Jim Hull #453
>>
>
>
>
> -- 
> Chris Burti Farmville, NC
>