[C320-list] documentation

[Jack McDonough]

Yes, you do put documentation numbers on the boat. But you don't put them on 
the outside. Ours is on the inside of the hull under the port lazarette. 
It's been eight years but I think I used stick-on numbers and letters and 
glassed them or polyeurothaned them so that they are permanent.

jack
#947
----- Original Message ----- 
From: <Aqua5Len at gmail.com>
To: <C320-List at catalina320.com>
Sent: Saturday, August 13, 2011 12:05 PM
Subject: Re: [C320-list] documentation


> WHEN YOUR BOAT IS COAST GUARD REGISTERED YOU DON'T PUT NUMBERS ON BOAT.
>
> LEN
> AQUA5
> MARINA DEL REY, CA
>
> On , jim brown <jbrown5093 at yahoo.com> wrote:
>> Curious as to where people have put the required numbers on a documented 
>> vessel. Also, has anyone had problems with the vessel ame on the port and 
>> starboard hull and the home port on the stern? The requirement is that 
>> they be in the same place.
>
>
>
>
>
>> Jim Brown
>
>
>
>
>
>
>
>> ________________________________
>
>> From: Guy Henry guyhenry22 at aol.com>
>
>> To: C320-List at catalina320.com
>
>> Sent: Friday, August 12, 2011 9:41 AM
>
>> Subject: Re: [C320-list] Is anyone else.....
>
>
>
>> A simple strip of white electrical tape calms the beast.
>
>
>
>> Guy
>
>> MoonShadow #115
>
>
>
>> On Aug 10, 2011 2:01 PM, "pat reynolds" lorasalum at yahoo.com> wrote:
>
>> removed the shin shreader long ago and put a strip of teak there instead
>
>
>
>
>
>> From: John Frost john at frostnet.net>
>
>> To: "C320-List at Catalina320.com"
>
>> Cc: ""
>
>> Sent: Wednesday, August 10, 2011 10:11 AM
>
>
>
>> Subject: Re: [C320-list] Is anyone else.....
>
>
>
>> On my boat it is caused by the stainless steel wear pad being mounted 
>> with a
>
>> slight overhang on the ...
>
>