[C320-list] Cabin Table

[Chris Burti]

I just talk about sitting on it...

...where it can hear me...

...and then it immediately puckers up and goes right on down on its own....

There's nothing like the mere thought of the vertical application a
fat southern redneck's posterior to wring submission out of any
recalcitrant piece of marine hardware....

Sign seen in the tool shed of the Lesser Dismal Swamp C-320 Yacht
Racing and Possum Hunting Assn. ....

"If duct tape won't hold it together or WD-40 won't break it loose, it
ain't worth messin with"




On Thu, Feb 17, 2011 at 4:29 AM,  <hcreech at comcast.net> wrote:
> I sit on it, works every time.
>
>
> Herb Creech
> Cloud Chaser 606
>
>
>
> ----- Original Message -----
> From: "David Swanson" <kswanson123 at comcast.net>
> To: C320-List at Catalina320.com
> Sent: Thursday, February 17, 2011 12:17:25 AM
> Subject: Re: [C320-list] Cabin Table
>
> No eccentrically is pushing it off center of the post. Don't do that, it makes the hydraulic cylinder stick and not want to contract. Push the post exactly in the center (centrally or concentric to the hydraulic post) to give the assembly the best chance at retracting.
>
>
> On Feb 16, 2011, at 7:34 AM, JJ Morrison wrote:
>
>>
>> I also have problems with the cabin table being put into the "down " position. I've taken it apart and lubricated but didn't seem to help much. I'm assuming that "eccentrically" means pushing on the center of the post??
>> Cheers
>> JohnM
>> #574 1999
>>
>>> From: kswanson123 at comcast.net
>>> Date: Tue, 15 Feb 2011 19:04:12 -0800
>>> To: C320-List at Catalina320.com
>>> Subject: Re: [C320-list] Cabin Table
>>>
>>> Ours seems stuck too at times. Just wiggle it and press down in the center of the hydraulic post to lower it. You have to push it down with sufficient force to overcome the stiction of the hydraulic post (especially if it hasn't been used in a while). Also eccentrically loading the post will also make it not want to move.
>>>
>>> Dave
>>>
>>> On Feb 15, 2011, at 8:47 AM, Carl Baird wrote:
>>>
>>>> Any advice as to how to lower the center cabin table to make room for an
>>>> extra birth? It appears to be stuck in the 'up' position, and I would like
>>>> to be able to lower it without breaking something. Thanks! (2001 C320)
>>>>
>>>> --
>>>> Carl R. Baird
>>>> The University of Michigan '14
>>>> UofM Men's Rowing
>>>> 616.438.4291
>>>
>>> David Swanson
>>> kswanson123 at comcast.net
>>>
>>>
>>>
>>
>
> David Swanson
> kswanson123 at comcast.net
>
>
>
>



-- 
Chris Burti
Farmville, NC