[C320-list] marina fire

[Chris Burti]

We were unscathed in all respects. Some real classics that had been
lovingly restored were lost. Though not official yet, by witness
accounts, the fire started at the shore power connection on a power
boat.

On Mon, Jan 17, 2011 at 6:01 PM, jim brown <jbrown5093 at yahoo.com> wrote:
> Chris,
> I take it (and hope) that all is well with your boat after the fire. Any further
> insight on the cause.
>
>
> Jim
>
>
>
>
> ________________________________
> From: Chris Burti <clburti at gmail.com>
> To: C320-List at catalina320.com
> Sent: Mon, January 17, 2011 2:09:53 PM
> Subject: Re: [C320-list] Dutchman control lines
>
> Should be a more than a foot or two extra for each one in the package.
> I've never needed to use the extra for anything. So, I think one foot
> should be a good enough for the one closest to the mast and then you
> will have plenty left for the shorter one. .
>
> On Mon, Jan 17, 2011 at 1:04 PM, Mike Paris <mparis495 at gmail.com> wrote:
>> The Dutchman control lines on my boat have not been connected since ice owned
>>it. I'm doing so now. I purchased a continuous length from Dutchman that I need
>>to cut for each line. My question is: how much excess line should I leave below
>>the boom (in the tab pouch)?
>>
>> Thanks,
>> Mike P
>> #734
>>
>> Sent from my iPhone
>
>
>
> --
> Chris Burti Farmville, NC
>
>
>
>
>



-- 
Chris Burti
Farmville, NC