[C320-list] Bilge pump (HELP)

[Irving Grunes]

Is the switch on at the panel?

Did you try to start the pump on manual from the panel
Igrunes #851

On Tue, Jun 7, 2011 at 5:45 PM, Chris Burti <clburti at gmail.com> wrote:

> Two screws in the laminate hold it in place and corrosion in the leads
> most likely did it in
>
> Thanks
> Chris Burti From: Jack McDonough
> Sent: Tuesday, June 07, 2011 5:07 PM
> To: C320-List at catalina320.com
> Subject: [C320-list] Bilge pump (HELP)
> After launching today, we discovered that the automatic bilge pump in
> our 2003  320 wasn't working. The pump worked fine on "manual" but the
> float switch in the bilge would not activate the pump.
>
> Assuming I need to replace the float switch, can anyone tell me how to
> remove it? In other words, how is it fastened to the bottom of the
> bilge?
>
> Or is there any other reason it wouldn't work -- and, if so, what's
> the solution?
>
> I'd be grateful for any help on this.
>
> Jack
> #947
>