[C320-list] throttle walk

[hcreech at comcast.net]

John, 
I had that problem several years ago, the temporary fix was to tie a line to hold the throttle in place. The fix was simple but required some work. You have to remove the compass, make sure you mark with masking tape so it goes back in the same way. There is a phillps head screw that creates the drag, I simply tighten it up and reassembled the binnacle . I did this several years ago it has not recurred. 


Herb Creech 
Could Chaser #606 



----- Original Message ----- 
From: "John Scott" < jcscott @ cpsc .com> 
To: C320-list at catalina320.com 
Cc: "John Scott" < jcscott @ cpsc .com> 
Sent: Sunday, March 20, 2011 10:40:57 PM 
Subject: [C320-list] throttle walk 

I just had a recent survey on my "new" 1993 320. The surveyor 
reported that she had "throttle walk". That is, the throttle wanted 
to seek low speed and walked its way from full on to a lower speed 
without holding where it was set. Has anyone had this problem? The 
surveyor said that I should install a "cable drag clamp" on the 
throttle cable. I've checked online and can't find this part. Nor 
can I find any reference to it. Any ideas? Thanks, in advance, for 
your help. 

John Scott