[C320-list] racor primary fuel filter
sailorlew at aol.com
sailorlew at aol.com
Mon Mar 21 13:53:48 PDT 2011
The nylon screw is there to be removed preventing an airlock if you just want to drain the bowl
Lew
-----Original Message-----
From: jim brown <jbrown5093 at yahoo.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Mon, Mar 21, 2011 2:46 pm
Subject: Re: [C320-list] racor primary fuel filter
It was. Also is there a gasket in the secondary fuel filter and if so should it
e replaced each time? It does not come with the filter. I suspect it has a
eparate part number.
________________________________
rom: David Swanson <kswanson123 at comcast.net>
o: C320-List at Catalina320.com
ent: Mon, March 21, 2011 10:29:51 AM
ubject: Re: [C320-list] racor primary fuel filter
Yea I know. The hand pump is the one with the knurled plastic knob. However,
here is another recessed nylon screw next to the hand pump. That is the one
hat I am not sure what it does. I was guessing that this is the one Jim Brown
as also asking about.
ave
David Swanson
/V Emily Ann
007 C320 MK II, No. 1107
ukilteo, WA
n Mar 21, 2011, at 7:25 AM, hcreech at comcast.net wrote:
> David,
The nylon screw is a manual hand pump. If you get an air lock from the tank to
>the filter this pump will "break" the lock.
Herb Creech
Cloud Chaser 606
----- Original Message -----
From: "David Swanson" <kswanson123 at comcast.net>
To: C320-List at Catalina320.com
Sent: Monday, March 21, 2011 10:15:27 AM
Subject: Re: [C320-list] racor primary fuel filter
I just changed my fuel filters and bled my fuel system of air yesterday.
Im not sure what the plastic screw is, I was wondering the same thing... The
bolt is the bleed vent.
I replaced my filter with the Racor R20U filter. This is also a 10 micron
filter. My boat came with a 10 micron filter as well.
The mechanic at the local Yanmar distributor said that given the small fuel
usages rates of these small sailboat engines, you could use a primary filter
down to the 2 micron size, although it would be overkill since the engine
mounted secondary fuel filter is 2 microns.
Anyway, I just changed mine, bled the air from the system using the Racor
filter housing hand operated fueld priming pump, and all is well now.
Dave
David Swanson
S/V Emily Ann
2007 C320 MK II, No. 1107
Mukilteo, WA
On Mar 20, 2011, at 1:45 PM, jim brown wrote:
> What is the nylon slotted screw on the top of the fuel filter housing for? I
> can't remember whether this is the bleed screw or the bolt is the bleed vent.
> Also, Yanmar recommends that the primary filter be 30 u but mine boat came
ith
>
> a 10 u filter. No problems with the 10 but just curious since the fuel rate
s
> listed a different in the Racor informtion.
>
>
> Jim Brown
>
>
>
>
> ________________________________
>
>
>
David Swanson
kswanson123 at comcast.net
David Swanson
swanson123 at comcast.net
More information about the C320-list
mailing list