[C320-list] Moving Main Sheet position on boom

[Brad Kuether]

Correct Jeff.  Tired of paying to fix the dodger.....


Thanks!


----- Original Message ----- 
From: "Jeff Hare" <catalina at thehares.com>
To: <C320-List at Catalina320.com>
Sent: Sunday, April 01, 2012 11:25 AM
Subject: Re: [C320-list] Moving Main Sheet position on boom


Hi Brad,

What goal are you trying to achieve? Sorry I don't recall the specific 
reason, but I suspect it may be related to the dodger?

Jeff

Brad Kuether <bkuether at comcast.net> wrote:

We have bridged this topic before, but now I am actually going to pull the 
trigger on this....

I want to move the rear most main sheet attachment on the boom forward. I 
have two options and want to hear any recommendations for or against them.

Option 1 - "Flip" the attachment point, so I only have to drill one new 
hole. Essentially moving it forward the entire length of the attachment.

Option 2 - Move it forward by half the length, drilling two new holes, which 
will surround the forward hole and cover it up when I am done.

I don't have an engineering degree. Is option 2 "dangerous" because now I 
have 4 holes in the boom fairly close together?

Thoughts?

Thanks so much in advance!!!!

-Brad, Mary, Monica, and Jarod
"Independence"
2004 Catalina 320 Hull 1006
Middle River, MD