[C320-list] Adler/Barbour Troubleshooting Guide

[Joseph R Aberdale]

Karl,

My unit is dead as well.  Would you please email me this document?  I tried to access it via the address in your note but it would not go through.

Thank you!

Joe Aberdale
#908


On May 1, 2012, at 12:04 PM, Karl Mielenhausen wrote:

> Went to use my A/B refrigeration last week and nothing happened.
> 
> Plenty of power at the unit and no fault indication from the
> troubleshooting LEDs on the PC board.
> I jumpered out the thermostat (inside the cold box) and still could
> not get the unit to come on.
> 
> Based upon what I read here and on other discussion lists, I was
> expecting to replace the Danfoss control module.
> I then got smart and called Adler/Barbour tech support (now Dometic)
> for some advice.
> I spoke to Jacob Prince (800-542-2477) who emailed me a troubleshooting guide.
> 
> I followed it to the letter and found the problem to be with the
> "trailer-style" connection for the thermostat. Something I overlooked
> when I jumpered it out at the 'other end".
> As they say in the instructions, you really need to take your jumper
> all the way down to T and C on the DANFOSS module.
> 
> I felt sure my module was shot.... glad it is not. This was an easy
> fix and the Yuenglings are cold again!!
> 
> The guide is now posted on our
> website...http://www.catalina320.com/filemgmt/visit.php?lid=151
> 
> Karl Mielenhausen